| Code | Faculty |
|---|---|
| 02133383 | Faculty of Natural and Agricultural Sciences |
| Credits | Duration |
|---|---|
| Duration of study: 3 years | Total credits: 458 |
| Minimum requirements for 2016 | ||||||||||||
| Achievement level | ||||||||||||
| Afrikaans or English | Mathematics | Physical Sciences | APS | |||||||||
| NSC/IEB | HIGCSE | AS-Level | A-Level | NSC/IEB | HIGCSE | AS-Level | A-Level | NSC/IEB | HIGCSE | AS-Level | A-Level | |
| 5 | 3 | C | C | 5 | 3 | C | C | 5 | 3 | C | C | 32 |
Students may enrol for AIM 111 and AIM 121 instead of AIM 101 (the same content presented over 2 semesters).
Students who do not qualify for STK 110 must register for STK 113 and STK 123
To be read with a view to the second year of study:
Students who intend to take mathematics to the 200 level, have to take the combination of WTW 114 and WTW 124 instead of WTW 134, WTW 146 and WTW 148, if they meet the entry requirements.
Electives are chosen as follows:
Second year – 13 credits
Third year – 22 credits
A student must pass all the minimum prescribed and elective module credits as set out at the end of each year within a programme as well as the total required credits to comply with the particular degree programme. Please refer to the curricula of the respective programmes. At least 144 credits must be obtained at 300-/400-level, or otherwise as indicated by curriculum. The minimum module credits needed to comply with degree requirements is set out at the end of each study programme. Subject to the programmes as indicated a maximum of 150 credits will be recognised at 100-level. A student may, in consultation with the Head of Department and subject to the permission by the Dean, select or replace prescribed module credits not indicated in BSc three-year study programmes to the equivalent of a maximum of 36 module credits.
It is important that the total number of prescribed module credits is completed during the course of the study programme. The Dean may, on the recommendation of the Head of Department, approve deviations in this regard. Subject to the programmes as indicated in the respective curricula, a student may not register for more than 75 module credits per semester at first-year level subject to permission by the Dean. A student may be permitted to register for up to 80 module credits in a the first semester during the first year provided that he or she obtained a final mark of no less than 70% for grade 12 Mathematics and achieved an APS of 34 or more in the NSC.
Students who are already in possession of a bachelor’s degree, will not receive credit for modules of which the content overlap with modules from the degree that was already conferred. Credits will not be considered for more than half the credits passed previously for an uncompleted degree. No credits at the final-year or 300- and 400-level will be granted.
The Dean may, on the recommendation of the programme manager, approve deviations with regard to the composition of the study programme.
Please note: Where elective modules are not specified, these may be chosen from any modules appearing in the list of modules.
It remains the student’s responsibility to acertain, prior to registration, whether they comply with the prerequisites of the modules they want to register for.
The prerequisites are listed in the Alphabetical list of modules.
Transitional measures for Mathematics modules for 2016
General promotion requirements in the faculty
All students whose academic progress is not acceptable can be suspended from further studies.
Minimum credits: 150
Programme-specific information
Minimum credits:
Fundamental = 12 credits
Core = 144 credits
Additional information:
Students who do not qualify for AIM 102 must register for AIM 111 and AIM 121.
Module content:
Find, evaluate, process, manage and present information resources for academic purposes using appropriate technology.
Module content:
Apply effective search strategies in different technological environments. Demonstrate the ethical and fair use of information resources. Integrate 21st-century communications into the management of academic information.
Module content:
The module aims to equip students with the ability to cope with the reading and writing demands of scientific disciplines.
Module content:
Find, evaluate, process, manage and present information resources for academic purposes using appropriate technology. Apply effective search strategies in different technological environments. Demonstrate the ethical and fair use of information resources. Integrate 21st-century communications into the management of academic information.
Module content:
This module begins by fostering an understanding of human geography. Then follows with the political ordering of space; cultural diversity as well as ethnic geography globally and locally; population geography of the world and South Africa: and four economic levels of development. The purpose is to place South Africa in a world setting and to understand the future of the country.
Module content:
Investigating southern African landscapes and placing them in a theoretical and global context. The geomorphological evolution of southern Africa. Introduction to the concepts of Geomorphology and its relationships with other physical sciences (e.g. meteorology, climatology, geology, hydrology and biology). The processes and controls of landform and landscape evolution. Tutorial exercises cover basic techniques of geomorphological analysis, and topical issues in Geomorphology.
Module content:
History, present and future of cartography. Introductory geodesy: shape of the earth, graticule and grids, datum definition, elementary map projection theory, spherical calculations. Representation of geographical data on maps: Cartographic design, cartographic abstraction, levels of measurement and visual variables. Semiotics for cartography: signs, sign systems, map semantics and syntactics, explicit and implicit meaning of maps (map pragmatics).
Module content:
Introduction to information systems, information systems in organisations, hardware: input, processing, output, software: systems and application software, organisation of data and information, telecommunications and networks, the Internet and Intranet. Transaction processing systems, management information systems, decision support systems, information systems in business and society, systems analysis, systems design, implementation, maintenance and revision.
Module content:
An introduction to the climate and general seasonal climatic circulation patterns of Southern Africa. Basic weather types and weather processes within the Southern African context. Interpretation of synoptic maps and synoptic station reports. Impacts of climate change and extreme climate events on society.
*BSc (Geography) and BSc (Environmental Sciences) students may register for WKD 155. Students are not allowed to earn credits for both WKD 155 and WKD 164.
Module content:
*Students will not be credited for more than one of the following modules for their degree: WTW 134, WTW 165, WTW 114, WTW 158. WTW 134 does not lead to admission to Mathematics at 200 level and is intended for students who require Mathematics at 100 level only. WTW 134 is offered as WTW 165 in the second semester only to students who have applied in the first semester of the current year for the approximately 65 MBChB, or the 5-6 BChD places becoming available in the second semester and who were therefore enrolled for MGW 112 in the first semester of the current year. Functions, derivatives, interpretation of the derivative, rules of differentiation, applications of differentiation, integration, interpretation of the definite integral, applications of integration. Matrices, solutions of systems of equations. All topics are studied in the context of applications.
Module content:
The importance of geographical data and an overview of geoinformatics. Cartographic analysis to geoinformatics – a historical perspective. Application fields of geoinformatics. Introduction to geographical information systems (GIS): Components, structure and functionality, GIS visualisation and cartography. Data sources and evaluation: fitness for purpose, factors affecting suitability, quality and uncertainty, sources of analogue and digital data. Map projection choice. Analysis of GIS output.
Module content:
Introducing the basic concepts and interrelationships required to understand the complexity of natural environmental problems, physical and human environment, human induced environmental problems, the ways in which the natural environment affects human society and biodiversity, an introduction to major environmental issues in Southern Africa and sustainable development in the context of environmental issues.
Module content:
General systems theory, creative problem solving, soft systems methodology. The systems analyst, systems development building blocks, systems development, systems analysis methods, process modelling.
Module content:
*Students will not be credited for more than one of the following modules for their degree:
WTW 124, WTW 146 and WTW 164. The module WTW 146 is designed for students who require Mathematics at 100 level only and does not lead to admission to Mathematics at 200 level.
Vector algebra, lines and planes, matrix algebra, solution of systems of equations, determinants. Complex numbers and polynomial equations. All topics are studied in the context of applications.
Module content:
*Students will not be credited for more than one of the following modules for their degree:
WTW 124, WTW 148 and WTW 164. The module WTW 148 is designed for students who require Mathematics at 100 level only and does not lead to admission to Mathematics at 200 level.
Integration techniques. Modelling with differential equations. Functions of several variables, partial derivatives, optimisation. Numerical techniques. All topics are studied in the context of applications.
Minimum credits: 146
Programme-specific information
Minimum credits:
Core = 143 credits
Elective = 12 credits
Additional information:
Module content:
Basic principles of law of contract. Law of sales, credit agreements, lease.
Module content:
*This is a closed module, only available to students studying [BTandRP] (12132022), [BSc(Arch)] (12132002), [BSc(LArch)] (12132004), BSc Meteorology (02133312), BSc Geoinformatics (02133383), BSc Environmental Science (02133361), BSc Geography (02133385), BEd Further Education and Training (General) (09133040), BA (01130001) or as approved by the head of department. The content of this module is the same as GIS 221 and students are not allowed to earn credits for both GGY 283 and GIS 221.
Introduction to Geographic Information Systems (GIS), theoretical concepts and applications of GIS. The focus will be on the GIS process of data input, data analysis, data output and associated technologies.
Module content:
The nature of geographical data and measurement. Probability, probability distributions and densities, expected values and variances, Central Limit theorem. Sampling techniques. Exploratory data analysis, descriptive statistics, statistical estimation, hypothesis testing, correlation analysis and regression analysis.
Module content:
This module will provide a thorough introduction to the basic scientific principles involved in remote sensing, and some of the applications to studies of the Earth’s surface. This includes examining the basic physics of electromagnetic radiation and the complex interactions of radiation with the surface and atmosphere (i.e. spectral signatures). In addition, basic concepts of photogrammetry will be discussed. The theoretical background laid out in the first half of the module will provide the tools for examining various remote sensing applications using data obtained in different parts of the electromagnetic spectrum. The applications will include uses of satellite remote sensing data for mapping and monitoring vegetation, soils and minerals, snow and ice, water resources and quality, and urban landscapes. The laboratory section will include hands-on experience with various satellite image data sets.
Module content:
Database design: the relational model, structured query language (SQL), entity relationship modelling, normalisation, database development life cycle; practical introduction to database design. Databases: advanced entity relationship modelling and normalisation, object-oriented databases, database development life cycle, advanced practical database design.
Module content:
Database management: transaction management, concurrent processes, recovery, database administration: new developments: distributed databases, client-server databases: practical implementation of databases.
Module content:
Descriptive statistics:
Sampling and the collection of data; frequency distributions and graphical representations. Descriptive measures of location and dispersion.
Probability and inference:
Introductory probability theory and theoretical distributions. Sampling distributions. Estimation theory and hypothesis testing of sampling averages and proportions (one and two-sample cases). Identification, use, evaluation and interpretation of statistical computer packages and statistical techniques.
Module content:
Multivariate statistics:
Analysis of variance, categorical data analysis, distribution-free methods, curve fitting, regression and correlation, the analysis of time series and indices.
Statistical and economic applications of quantitative techniques:
Systems of linear equations: drafting, matrices, solving and application. Optimisation; linear functions (two and more independent variables), non-linear functions (one and two independent variables). Marginal and total functions. Stochastic and deterministic variables in statistical and economic context: producers' and consumers' surplus, distribution functions, probability distributions, probability density functions. Identification, use, evaluation, interpretation of statistical computer packages and statistical techniques.
This module is also presented as an anti-semester bilingual module.
Module content:
Adjustment and use of following instruments: Plane table, level, compass and theodolite. Elementary site surveying and leveling, tachometry. Definition of survey. Co-ordinate systems and bearing. Connections and polars. Methods of determining points. Elevation. Tachometry.
Module content:
Origin and affinity of South African flora and vegetation types; principles of plant geography; plant diversity in southern Africa; characteristics, environments and vegetation of South African biomes and associated key ecological processes; centra of plant endemism; rare and threatened plant species; biodiversity conservation and ecosystem management; invasion biology; conservation status of South African vegetation types.
Module content:
Nitrogen metabolism in plants; nitrogen fixation in Agriculture; plant secondary metabolism and natural products; photosynthesis and carbohydrate metabolism in plants; applications in solar energy; plant growth regulation and the Green Revolution; plant responses to the environment; developing drought tolerant and disease resistant plants.
Module content:
Theory: Classical chemical thermodynamics, gases, first and second law and applications, physical changes of pure materials and simple compounds. Phase rule: Chemical reactions, chemical kinetics, rates of reactions.
Module content:
Theory: Statistical evaluation of data, gravimetric analysis, aqueous solution chemistry, chemical equilibrium, precipitation-, neutralisation- and complex formation titrations, redox titrations, potentiometric methods, introduction to electrochemistry.Module content:
Theory: Resonance, conjugation and aromaticity. Acidity and basicity. Introduction to 13C NMR spectroscopy. Electrophilic addition: alkenes. Nucleophilic substitution, elimination, addition: alkyl halides, alcohols, ethers, epoxides, carbonyl compounds: ketones, aldehydes, carboxylic acids and their derivatives.
Module content:
Theory: Atomic structure, structure of solids (ionic model). Coordination chemistry of transition metals: Oxidation states of transition metals, ligands, stereochemistry, crystal field theory, consequences of d-orbital splitting, chemistry of the main group elements, electrochemical properties of transition metals in aqueous solution, industrial applications of transition metals. Introduction to IR spectroscopy.
Module content:
Physical processes that influence the earth’s surface and management. Specific processes and their interaction in themes such as weathering; soil erosion; slope, mass movement and fluvial processes. Practical laboratory exercises are based on the themes covered in the module theory component.
Module content:
*This module is for Architecture and Landscape Architecture students only.
The theory component covers geomorphological aspects of the built environment including landscape identification; weathering or deterioration of natural stone and application to design and preservation of buildings and monuments; slope hydrology and stability conditions; soil erosion processes and construction impacts; drainage modification in urban areas; wetland identification, human impacts and rehabilitation; recreational impacts and management. In addition to the theory a field-based project is undertaken.
Module content:
*The content of this module is the same as GGY 283 and students are not allowed to earn credits for both GGY 283 and GIS 221.
Introduction to Geographic Information Systems (GIS), theoretical concepts and applications of GIS. The focus will be on the GIS process of data input, data analysis, data output and associated technologies.
Module content:
Origin and development of soil, weathering and soil formation processes. Profile differentiation and morphology. Physical characteristics: texture, structure, soil water, atmosphere and temperature. Chemical characteristics: clay minerals, ion exchange, pH, buffer action, soil acidification and salinisation of soil. Soil fertility and fertilisation. Soil classification. Practical work: Laboratory evaluation of simple soil characteristics. Field practicals on soil formation in the Pretoria area.
Module content:
Introduction to sedimentology; grain studies; composition and textures of sedimentary rocks; flow dynamics and behaviour of sediment particles in transport systems; description and genesis of sedimentary structures; diagenesis; depositional environments and their deposits, modern and ancient; chemical sedimentary rocks; economic sedimentology; field data acquisition from sedimentary rocks and writing of reports; sieve analysis; Markov analysis; analysis of palaeocurrent trends; interpretation of sedimentary profiles.
Module content:
Integrated theoretical and practical course dealing with the principles of rock deformation and analysis of deformed rocks. Stress, strain and rheology, joints, experimental rock deformation, fault systems and Anderson’s theory of faulting. Folds and interference folding, tectonic fabrics, shear zones, progressive deformation. Stereographic projection and structural analysis.
Module content:
Classification and nomenclature of igneous rocks. The nature of silicate melts; physical and chemical factors influencing crystallisation and textures of igneous rocks. Phase diagrams, fractional crystallisation and partial melting. Trace elements and isotopes, and their use in petrogenetic studies. Global distribution of magmatism and its origin. Mid-oceanic ridges, active continental margins, intraplate magmatism.
Module content:
Classification of metamorphic rocks. Anatexis, migmatite and granite; eclogite. Metamorphic textures. PT-time loops. Metamorphism in various plate tectonic environments.
Module content:
Origin and classification of groundwater; classification of aquifers; groundwater movement; equations for groundwater flow into boreholes; the La Place equation and solutions for pump tests; execution and interpretation of pump tests. Groundwater flow modelling; classification of aquifers in southern Africa; groundwater exploration and management. Mapping techniques.
Module content:
Application of spreadsheets and query languages in an accounting environment.
Module content:
Systems analysis. Systems design: construction; application architecture; input design; output design; interface design; internal controls; program design; object design; project management; system implementation; use of computer-aided development tools.
Module content:
Classical mechanics (28 lectures)
Fundamental concepts, energy and angular momentum, calculus of variations and Lagrangian mechanics, conservative central forces and two body problems, scattering, mechanics in rotating reference frames, many body systems.
Physical Optics (14 lectures)
Maxwell’s equations, wave equation and plane wave solution, coherence, interference,
diffraction, polarisation.
Physics of Materials (14 lectures)
Classification of materials. Atomic bonding. Crystallography. Defects. Material strength.
Phase diagram's, Ceramics. Polymers. Composites. Fracture. Electrical and
magnetic properties. Semiconductors. Smart materials Nanotechnology.
Experiments (14 sessions)
Module content:
Adjustment and use of following instruments: Plane table, level, compass and theodolite. Elementary site surveying and levelling, tachometry. Definition of survey. Co-ordinate systems and bearing. Connections and polars. Methods of determining points. Elevation. Tachometry.
Module content:
Stresses, strains and the mechanical properties of materials: Normal stress and shear stress, tension and compression, equilibrium in shear, factor of safety, design, shear strain, stress/strain diagram, Hooke’s Law, Poisson’s Ratio and the shear stress/strain diagram. Axial loads: Elastic deformation, displacements, statically determinate and indeterminate structures and thermal effects. Torsion: Torsion of circular bars and power transmission bending of straight members and composite beams. Transverse shear: Shear in straight members and shear flow. Combined loads: Thin walled pressure vessels and stresses as a result of combined loads. Stress transformation: Plane stress transformation, principle stresses, maximum values and stress variation in prismatic beams. Strain transformation: Plane strain transformation, principle strains, maximum values, strain gauges and rosettes and the relationship between E, G and ?. Design of beams from section characteristics. Deflection of beams: The elastic curve, integration method, Macaulay’s method and superposition.
Module content:
General surveying; instruments, their handling and adjusting; surveying systems and simple calculations; determining of levels; setting out of the works; tacheometry and plotting; scales, planimetry; areas and volumes; construction surveying; aerial photography.
Module content:
Conservative forces and conservation laws. Basic thermodynamic laws for dry and humid air. The equation of state. Adiabatic processes and temperature lapse rates. The Clausuis-Claperon equation. Calculation of the wet adiabat.
Module content:
This is an introduction to linear algebra on Rn. Matrices and linear equations, linear combinations and spans, linear independence, subspaces, basis and dimension, eigenvalues, eigenvectors, similarity and diagonalisation of matrices, linear transformations.
Module content:
Calculus of multivariable functions, directional derivatives. Extrema and Lagrange multipliers. Multiple integrals, polar, cylindrical and spherical coordinates.
Module content:
Properties of real numbers. Analysis of sequences and series of real numbers. Power series and theorems of convergence. The Bolzano-Weierstrass theorem. The intermediate value theorem and analysis of real-valued functions on an interval. The Riemann integral: Existence and properties of the interval.
Module content:
Abstract vector spaces, change of basis, matrix representation of linear transformations, orthogonality, diagonalisability of symmetric matrices, some applications.Module content:
Numerical integration. Numerical methods to approximate the solution of non-linear equations, systems of equations (linear and non-linear), differential equations and systems of differential equations. Direct methods to solve linear systems of equations.
Module content:
Setting up and solving recurrence relations. Equivalence and partial order relations. Graphs: paths, cycles, trees, isomorphism. Graph algorithms: Kruskal, Prim, Fleury. Finite state automata.
Module content:
*Students will not be credited for more than one of the modules for their degree: WTW 264, WTW 286
Theory and solution methods for ordinary differential equations and initial value problems: separable and linear first-order equations, linear equations of higher order, systems of linear equations. Application to mathematical models. Numerical methods applied to nonlinear systems.Qualitative analysis of linear systems.
Module content:
Origin and extent of modern invertebrate diversity; parasites of man and domestic animals; biology and medical importance of arachnids; insect life styles; the influence of the environment on insect life histories; insect phytophagy, predation and parasitism; insect chemical, visual, and auditory communication; freshwater invertebrates and their use as biological indicators.
Module content:
Introduction to general vertebrate diversity; African vertebrate diversity; vertebrate structure and function; vertebrate evolution; vertebrate relationships; aquatic vertebrates; terrestrial ectotherms; terrestrial endotherms; vertebrate characteristics; classification; structural adaptations; habits; habitats; conservation problems; impact of humans on other vertebrates.
Module content:
Vibrating systems and waves (14 lectures)
Simple harmonic motion (SHM). Superposition (different frequencies, equal frequencies). Perpendicular vibrations (Lissajous figures). Damped SHM. Forced oscillations. Resonance. Q-value. Transverse wave motion. Plane wave solution using method of separation of variables. Reflection and transmission at a boundary. Normal and eigenmodes. Wave packets. Group velocity.
Modern physics (30 lectures)
Special relativity: Galilean and Lorentz transformations. Postulates. Momentum and energy. 4 vectors and tensors. General relativity. Quantum physics. Failure of classical physics. Bohr model. Particle-wave duality. Schrödinger equation. Piece-wise constant potentials. Tunneling. X-rays. Laser. Nuclear physics: Fission. Fusion. Radioactivity.
Heat and thermodynamics (12 lectures)
Heat. First Law. Kinetic theory of gases. Mean free path. Ideal, Clausius, Van der Waals and virial gases. Entropy. Second Law. Engines and refrigerators. Third Law. Thermodynamic potentials: Enthalpy Helmholtz and Gibbs free energies, Chemical potential. Legendre transformations (Maxwell relations). Phase equilibrium. Gibbs phase rule.
Modelling and simulation (7 practical sessions)
Introduction to programming in a high level system: Concept of an algorithm and the basic logic of a computer programme. Symbolic manipulations, graphics, numerical computations. Applications: Selected illustrative examples.
Error Analysis (7 practical sessions)
Experimental uncertainties. Propagation of uncertainties. Statistical analysis of random uncertainties. Normal distribution. Rejection of data. Least-squares fitting. Covariance and correlation.
Module content:
An urbanising world. Urban structure and land use. Urban processes. The urban environment. Social structure and change in cities. Living in the city. Economy, society and politics in the city. Third-world cities and South African cities. Urban futures.
Module content:
Fundamental concepts in mineralogy, and practical applications of mineralogy, including: the basics of crystal structure; the crystallographic groups; the rules of atomic substitution; phase transitions and phase diagrams; the structure and uses of olivine, pyroxene, feldspar, amphibole, mica, aluminosilicates, garnet, cordierite, and more uncommon mineral groups such as oxides, sulphides and carbonates; the calculation of mineral formulae from chemical analyses using various methods. Practical sessions: the basics of optical mineralogy and the use of transmitted light microscopy for thin section examination of minerals and rocks; the practicals will develop mineral identification skills for the minerals covered in the lectures, and cover basic textural identification.
Module content:
The influence of biotic and abiotic factors on the productivity of different strata and components of natural and planted pastures. This will enable the student to understand the management, production, appropriate and optimal utilisation as well as the conservation of these pastures. These principles can be used to ensure sustainable animal production and health.
Module content:
Vectors and geometry. Calculus of vector functions with applications to differential geometry, kinematics and dynamics. Vector analysis, including vector fields, line integrals of scalar and vector fields, conservative vector fields, surfaces and surface integrals, the Theorems of Green, Gauss and Stokes with applications.
Module content:
Vector algebra, curl of a vector, total and partial derivatives, second law of motion. Spherical coordinates Acceleration in rotating co-ordinates, fundamental forces, momentum equation. Three dimensional flow balance, conservation of mass, heat equation, thermodynamic energy equation. Introduction to finite difference methods. Numerical estimation of the geostrophic wind, vorticity and divergence. Advection of temperature. Development of a two-dimensional temperature advection model.
Module content:
*Students will not be credited for both WTW 162 and WTW 264 or both WTW 264 and WTW 286 for their degree.
Theory and solution methods for ordinary differential equations and initial value problems: separable and linear first order equations, linear equations of higher order, systems of linear equations. Laplace transform.
Minimum credits: 162
Programme-specific information
Minimum credits:
Core = 132 credits
Elective = 14 credits
Additional information:
Module content:
Advanced theory and practice of Geographic Information Systems; GIS applications; design and implementation of GIS applications.
Module content:
Construction of Raster Geovisualisations, spatial model construction and use, multi-criteria decision analysis. Factor analysis: Principle component analysis. Geostatistics: Spatial dependence modelling, ordinary kriging. Markov chains and cellular Automata, combined models.
Module content:
This module aims to provide students with a working knowledge and skills to learn methods and techniques for collecting, processing and analysing remotely sensed data. Throughout the module, emphasis will be placed on image processing, image analysis, image classification, remote sensing and applications of remote sensing in geographical analysis and environmental monitoring. The module is composed of lectures, readings, laboratory exercises and research tasks.
Module content:
Spherical trigonometry. Geometrical Geodesy: Datum surfaces and coordinate systems in Geodesy, Calculations on the ellipsoid, Datum transformations. Map projections: Projection principles, distortion determination, construction of conformal, equivalent and equidistant projections, the Transverse Mercator projection and UTM projection of an ellipsoidal earth, projection transformations. Space Geodesy: Time systems, Celestial and observer coordinate systems, Global Navigation Satellite Systems (GNSS), Satellite orbits and orbital parameters, 3¬ D positioning.
Module content:
A project which is approved by the lecturer and in which one or more of the studied techniques of data acquisition and processing are used to produce an output of spatially referenced information. The project must be fully described in a project report.
Module content:
Introduction to business management as a science; the environment in which the enterprise operates; the field of business, the mission and goals of an enterprise; management and entrepreneurship. The choice of a form of enterprise; the choice of products and/or services; profit and cost planning for different sizes of operating units; the choice of location; the nature of production processes and the layout of the plant or operating unit.
Introduction to and overview of general management, especially regarding the five management tasks: strategic management; contemporary developments and management issues; financial management; marketing and public relations. Introduction to and overview of the value chain model; management of the input; management of the purchasing function; management of the transformation process with specific reference to production and operations management; human resources management and information management; corporate governance and black economic empowerment (BEE).
Module content:
Responsible leadership and the role of a business in society. The nature and development of entrepreneurship; the individual entrepreneur and characteristics of South African entrepreneurs. Looking at the window of opportunity. Getting started (business start up). Exploring different routes to entrepreneurship: entering a family business, buying a franchise, home-based business and the business buyout. This semester also covers how entrepreneurs can network and find support in their environments. Case studies of successful entrepreneurs - also South African entrepreneurs - are studied.
Module content:
The emphasis is on the efficiency of the mechanisms whereby C3-, C4 and CAM-plants bind CO2 and how it impacted upon by environmental factors. The mechanisms and factors which determine the respiratory conversion of carbon skeletons and how production is affected thereby will be discussed. Insight into the ecological distribution and manipulation of plants for increased production is gained by discussing the internal mechanisms whereby carbon allocation, hormone production, growth, flowering and fruitset are influenced by external factors. To understand the functioning of plants in diverse environments, the relevant structural properties of plants, and the impact of soil composition, water flow in the soil-plant air continuum and long distance transport of assimilates will be discussed. Various important techniques will be used in the practicals to investigate aspects such as water-use efficiency, photosynthesis and respiration of plants.
Module content:
Theory of plant community concepts, floristic and structural composition, plant diversity, ecological succession, landscape ecology. Data processing techniques. Species interactions and an evaluation of their effects on interacting species. Fundamentals of plant population biology: life tables; plant breeding systems and pollination; population dynamics; life history strategies; intraspecific competition; interspecific competition and co-existence.
Module content:
The module will include a review on the discovery and use of plant medicines and phyto-therapeutically important molecules obtained from plants. Certain aspects of natural product chemistry i.e. the biosynthesis, ecological role and toxicity of the three main classes of secondary compounds; terpenoids, phenolics, and alkaloids are discussed. An introduction to the principles and applications of metabolomics are presented. The role of these natural products in defence against microorganisms and herbivores is reviewed during the module. The basics of alternative medicines such as homeopathy, ayurvedic medicine, acupuncture etc. are also discussed. Practical sessions on drug discovery approaches using chromatographic techniques for phytochemical analysis of secondary metabolites such as tannins, alkaloids, sterols and saponins are conducted. Bioassays on micro-organisms are also done during the practical sessions in order to develop the skills for the potential discovery of new antibiotics. Visits to several pharmaceutical laboratories are arranged.
Module content:
Basic principles and methods of plant classification. Sources of plant variation. Modern methods to ascertain evolutionary relationships among plants. The extent and significance of vascular plant diversity. General structural and biological characteristics of evolutionary and ecologically important plant groups. Botanical nomenclature. Plant identification in practice; identification methods, keys, herbaria and botanical gardens. Diagnostic characters for the field identification of trees, wild flowers and grasses. Family recognition of southern African plants. Available literature for plant identification. Methods to conduct floristic surveys. Nature and significance of voucher specimens.
Module content:
Theory: Molecular quantum mechanics. Introduction: Shortcomings of classical physics, dynamics of microscopic systems, quantum mechanical principles, translational, vibrational and rotational movement. Atomic structure and spectra: Atomic hydrogen, multiple electron systems, spectra of complex atoms, molecular structure, the hydrogen molecule ion, diatomic and polyatomic molecules, structure and properties of molecules. Molecules in motion: Viscosity, diffusion, mobility. Surface chemistry: Physisorption and chemisorption, adsorption isotherms, surface tension, heterogeneous catalytic rate reactions, capillarity.
Module content:
Theory: Separation methods: Extraction, multiple extraction, chromatographic systems. Spectroscopy: Construction of instruments, atomic absorption and atomic emission spectrometry, surface analysis techniques. Mass spectrometry. Instrumental electrochemistry.
Module content:
Theory: NMR spectroscopy: applications. Aromatic chemistry, Synthetic methodology in organic chemistry. Carbon-carbon bond formation: alkylation at nucleophilic carbon sites, aldol and related condensations, Wittig and related reactions, acylation of carbanions (Claisen condensation).
Module content:
Theory: Structure and bonding in inorganic chemistry. Molecular orbital approach, diatomic and polyatomic molecules, three-centre bonds, metal-metal bonds, transition metal complexes, magnetic properties, electronic spectra, reactivity and reaction mechanisms, reaction types, acid-base concepts, non-aqueous solvents, special topics.
Module content:
*Note: The module is available for BSc (Geography) and BSc (Environmental Sciences) students only. The theory content of this module is the same as GGY 363 and students are not allowed to earn credits for both GGY 361 and GGY 363.
Interactions of geomorphic processes within the physical and built environments; themes such as geomorphology and environmental change, slope processes and the environment, geomorphic risks and hazards, soil erosion and conservation, geomorphology in environmental management, applied weathering. Practicals involve fieldwork including sampling and mapping and subsequent laboratory analysis.
Module content:
*Note: The content of this module is the same as GGY 361 and students are not allowed to earn credits for both GGY 361 and GGY 363.
Interactions of geomorphic processes within the physical and built environments; themes such as geomorphology and environmental change, slope processes and the environment, geomorphic risks and hazards, soil erosion and conservation, geomorphology in environmental management, applied weathering.
Module content:
The more exact chemistry of soils systematically explained by understanding the particular chemical principles. Charge origin. Chemical equilibriums. Manifestations of sorption. Ion exchange. Acidic soils, saline soils and the organic fraction of soil. The chemistry of the important plant nutrient elements P, K and N is explained.
Module content:
A taxonomic system for South Africa. USDA’s Soil Taxonomy. Land suitability evaluation. Optimal resource utilization. The conservation component. Ecological aspects. Ecotype, land types. Soil maps. Practical work: Field practicals and compulsory excursion. Identification of soil horizons, forms and families. Land suitability evaluation. Elementary mapping exercise.
Module content:
Systematic review of major metallic and non-metallic ore types and examples in South Africa and world-wide; ore type models (grades, tonnages); geometry of ore bodies; mining. Ore samples and ore mineralogy. Mapping techniques.
Module content:
Review of classical geostatistical methods; problem evaluation; descriptive statistics, normal-, lognormal, three parameter lognormal distributions; confidence intervals; t-test. Sampling; cut-off values; grid generation and trend surface analysis. Semivariogram; error estimation; Kriging (BLUE) techniques. Ore reserve calculations.
Module content:
Definition and scope of engineering geology; engineering geological properties and problems of rocks and soils within different stratigraphic units and climatic regions in southern Africa.
Module content:
*INF 301 is a module that combines INF 315, INF 324, INF 354 and INF 370. Students register for all these modules, but receive a calculated percentage for INF 301.
A review of current trends that are relevant to the application of information systems within a business environment. Information systems in organisations, social and ethical responsibilities, the role of the Informatician. IT end-user relationships; IT management. Advanced programming. Application of systems analysis and design in a practical project; programming; use of computer-aided development tools.
Module content:
A review of current trends which are relevant to the application of information systems within a business environment.
Module content:
Information systems in organisations, social and ethical responsibilities, the role of the Informatician. IT end-user relationships; IT management.
Module content:
Application of systems analysis and design in a practical project; programming; use of computer-aided development tools.
Module content:
Quantitative description and measurement of soil water content and potential as well as saturated and unsaturated hydraulic conductivity. Modelling water flow in soil (Darcy’s law, Richards's equation). Infiltration, redistribution, evaporation, runoff and percolation. Irrigation in South Africa. Modelling and managing the soil water balance. Plant water consumption and the soil-plant-atmosphere continuum. Irrigation scheduling (soil, plant and atmosphere approaches). Managing poor quality water. Irrigation systems. The module includes a field trip to an irrigation scheme.
Module content:
Statistical mechanics (28 lectures)
Isolated systems in thermodynamical equilibrium. Systems in equilibrium with a heat bath: the canonical ensemble, Gibbs' entropic formula, classical statistical mechanics, energy equipartition theorem, thermodynamic potentials, paramagnetism.
The classical limit of perfect gases: non-distinguishable character of quantum particles, the equation of state of the classical ideal gas. Quantum perfect gases: Black body radiation, the grand canonical ensemble, Fermi-Dirac distribution, the free electron gas in metals, the Bose-Einstein distribution, Bose-Einstein condensation.
Solid state physics (28 lectures)
Crystal structures, the reciprocal lattice, x-ray diffraction, lattice vibration, the Debye model, characteristics of solids, the free electron model, Pauli paramagnetism, electronic heat capacity, the relaxation time, electrical conduction, the classical Hall effect, thermal conduction in metals, failures of the free electron model, the independent electron model, band theory of solids.
Computational Physics and modelling. Assessment will be done through a portfolio of project reports. The topics for the projects will be selected from various sub-disciplines of Physics.
Module content:
Introduction to soil mechanics. Introduction to clay mineralogy. Mass, volume relationships and phases of soil. Groundwater flow and permeability. Effective stress principles. Suction pressures in saturated as well as partially saturated soil. The Mohr circle and stresses at a point. The Mohr-Coulomb strength theory and the stress-strain properties of soil. The Boussinesq theory. Consolidation theory and soil settlement.
Module content:
The influence of biotic and abiotic factors on the productivity of different strata and components of natural pastures. This will enable the student to advise users, with the necessary motivation, on the appropriate use of these strata and components and will form a basis for further research on this system. The principles of veld management s and the influence of management practices on sustainable animal production from natural pastures. This will enable the student to advise users on veld management and veld management principles. It will also form a basis for further research on veld management.
Module content:
The establishment and use of planted pastures species and fodder crops and the
conservation of fodder. This will enable students to advise users on establishment and utilization of planted pastures species as well as farmers on the production,
conservation and optimum use of fodder. This will also form a basis for further research on planted pastures.
Module content:
Scale analyses and simplification of the basic equations. The geostrophic, thermal and gradient wind. The vorticity equation and divergence.
Module content:
Tendency and Omega equations. Model of a boroclinic system. Introduction to numerical models. Application in meteorological display and analysis software.
Module content:
Topology of finite dimensional spaces: Open and closed sets, compactness, connectedness and completeness. Theorems of Bolzano-Weierstrass and Heine-Borel. Properties of continuous functions and applications. Integration theory for functions of one real variable. Sequences of functions.
Module content:
Series of functions, power series and Taylor series. Complex functions, Cauchy- Riemann equations, Cauchy's theorem and integral formulas. Laurent series, residue theorem and calculation of real integrals using residues.
Module content:
Mean variance portfolio theory. Market equilibrium models such as the capital asset pricing model. Factor models and arbitrage pricing theory. Measures of investment risk. Efficient market hypothesis. Stochastic models of security prices
Module content:
Discrete time financial models: Arbitrage and hedging; the binomial model. Continuous time financial models: The Black-Scholes formula; pricing of options and the other derivatives; interest rate models; numerical procedures.Module content:
Group theory: Definition, examples, elementary properties, subgroups, permutation groups, isomorphism, order, cyclic groups, homomorphisms, factor groups. Ring theory: Definition, examples, elementary properties, ideals, homomorphisms, factor rings, polynomial rings, factorisation of polynomials. Field extensions, applications to straight-edge and compass constructions.
Module content:
Matrix exponential function: homogeneous and non-homogeneous linear systems of differential equations. Qualitative analysis of systems: phase portraits, stability, linearisation, energy method and Liapunov's method. Introduction to chaotic systems. Application to real life problems.
Module content:
Direct methods for the numerical solution of systems of linear equations, pivoting strategies. Iterative methods for solving systems of linear equations and eigenvalue problems. Iterative methods for solving systems of nonlinear equations. Introduction to optimization. Algorithms for the considered numerical methods are derived and implemented in computer programmes. Complexity of computation is investigated. Error estimates and convergence results are proved.
Module content:
Conservation laws and modelling. Fourier analysis. Heat equation, wave equation and Laplace's equation. Solution methods including Fourier series. Energy and other qualitative methods.
Module content:
Kinematics of a continuum: Configurations, spatial and material description of motion. Conservation laws. Analysis of stress, strain and rate of deformation. Linear constitutive equations. Applications: Vibration of beams, equilibrium problems in elasticity and special cases of fluid motion.
Module content:
Axiomatic development of neutral, Euclidean and hyperbolic geometry. Using models of geometries to show that the parallel postulate is independent of the other postulates of Euclid.
Module content:
Scientific approach to ecology; evolution and ecology; the individual and its environment; population characteristics and demography; competition; predation; plant-herbivore interactions; regulation of populations; population manipulation.
Module content:
Mammalian origins and their characteristics: evolution of African mammals; structure and function: integument, support and movement; foods and feeding; environmental adaptations; reproduction; behaviour; ecology and biogeography; social behaviour; sexual selection; parental care and mating systems; community ecology; zoogeography. Special topics: parasites and diseases; domestication and domesticated mammals; conservation.
Module content:
The scientific approach; characteristics of the community; the community as a superorganism; community changes; competition as a factor determining community structure; disturbance as a determinant of community structure; community stability; macroecological patterns and mechanisms.
Module content:
This module focuses on the integration of physiological systems in the context of animal form and function, and the ways in which evolution shapes the physiological processes that determine the energy, water and nutrient fluxes between animals and their environments. Topics covered include: (i) circulation, gas exchange and excretion; (ii) nutritional ecology; (iii) osmoregulation and thermoregulation; and (iv) reproductive physiology. The major focus of this module is to understand the major sources of physiological diversity, namely scaling, phylogenetic inertia, adaptation and phenotypic plasticity, and applying this knowledge to conceptually link physiological processes at the cellular level to macrophysiological patterns at a global scale.
Module content:
The extent and significance of insect diversity. Functional insect morphology. The basic principles of taxonomy and the classification of taxa within the Insecta. Insect orders and economically and ecologically important Southern African insect families. Identification of insect orders and families using distinguishing characteristics. General biological and behavioural characteristics of each group. Grouping of insects into similar life-styles and habitats.
Module content:
This module focuses on the means by which animals can sense and respond to the external and internal environment. Topics covered include: (i) the structure and function of biological membranes; (ii) neurons and nervous systems; (iii) sensing the environment; (iv) glands, hormones and regulation of development and growth; (v) muscles and animal movement and (vi) the initiation and control of behaviour. The implications of these physiological processes for animal conservation and management will be emphasised. A comparative approach will be adopted throughout the module to highlight the commonalities as well as the ways in which animal lineages have achieved similar functional outcomes from different structural adaptations.
Module content:
Evolution as a process and pattern, prime movers in evolution: Selection, drift, general population genetics. Population differentiation, clines, subspecies and species, adaptation as a major force in evolution and the panglossian paradigm, molecular evolution. Phylogeography, phylogenetic reconstruction. Evolutionary biogeography. Adaptation, Darwin's formulation, proximate and ultimate causation, genetic and developmental constraints, optimality. Phenotypic models, the comparative method, convergent evolution. Evolution of complex biological systems, origin of life and sex, macro-evolution, punctuated equilibrium, human evolution. Levels of selection. Species concepts.
Module content:
The history of behavioural ecology. A causal, developmental, evolutionary and adaptive approach. Sensory systems and communication. Sexual selection, mate choice and sperm competition. Kin selection and group living. Special reference to social insects. The behavioural ecology of humans. Phylogenetic basis of behavioural analysis. The role of behavioural ecology in conservation planning.
Module content:
This module is intended to provide students with skills to undertake field surveys that are essential for research and planning in the conservation of biodiversity. The module has a large fieldwork component. A field trip will be conducted over a ten-day period during the September vacation in the Sani Pass region of the Drakensberg (including South Africa and Lesotho).
The students will be actively involved in planning and executing the field surveys, and will be responsible for analysing and presenting the results. The students will gain valuable practical experience in the field by applying a number of survey techniques and focusing on several different taxa that are relevant to conservation ecology.
Module content:
*It is strongly recommended that students first complete ZEN 355: Insect diversity 355
Impact of insects on economies, human health and well-being. Protection of corps from insect herbivores through monitoring, forecasting and application of the principles of integrated pest management; epidemiology and modern developments in the control of insect vectors of human and animal diseases; insects as a tool in forensic investigations; ecological and economic significance of insect pollinators and current threats to their survival and health. Lecturers will be complemented by practical experiences that provide students with skills in the design, conduct, analysis, interpretation and reporting of applied entomological research.
Module content:
Electronics (14 lectures)
Thévenin and Norton equivalent circuits, superposition principle, RC, LC and LRC circuits. Semiconductor diode. Bipolar transistor. Operational amplifiers. Computer controlled instrumentation.
Electromagnetism (21 lectures)
Electrostatics: Coulomb’s law, divergence and curl of E, Gauss’ law, Laplace’s equation, image charge problems, multipole expansion.
Magnetostatics: Lorenz force, Biot-Savart law, divergence and curl of magnetic field strength, Ampère’s law, magnetic vector potential, multipole expansion, boundary conditions.
Electrodynamics: Electromotive force, electromagnetic induction, Maxwell’s equations, wave equation.
Electric and magnetic fields in matter: Polarisation, electric displacement and Gauss’s law in dielectrics, linear dielectrics. Magnetisation (diamagnets, paramagnets, ferromagnets), auxiliary field H and Ampère’s law in magnetised materials, linear and nonlinear media.
Quantum mechanics (28 lectures)
The Schrödinger equation, the statistical interpretation of the wave function, momentum, the uncertainty principle, the time-independent Schrödinger equation, stationary states, the infinite square well potential, the harmonic oscillator, the free particle, the Delta-Function potential, the finite square well potential, Hilbert spaces, observables, eigen functions of a Hermitian operator, Dirac notation, the Schrödinger equation in spherical coordinates, the hydrogen atom, angular momentum spin.
Module content:
The module conceptually integrates environmental, economic, and social components of sustainable development. Other topics covered include changing perceptions on development and environment, development paradigms, challenges of sustainable development, actors and actions in sustainable development, rural and urban livelihoods, and a Third World assessment of sustainable development in the developing world.
Module content:
Classic development frameworks. Spatial development history and legacy in South Africa. Overview of contemporary environmental legislation in South Africa. Rural development strategy. Rural and agricultural reconstruction. Land reform. Urban development and strategy. Urban spatial reconstruction. National spatial development frameworks.
Module content:
Strength and failure modes of rock material and rock failure criteria. The characteristics of joints in rock. Joint line surveys and interpretation of data. Characteristics of a rock mass, rock mass classification and determination of strength. Slope stability in surface mines. Induced seismicity due to deep mining and rock bursts.
Module content:
Plant genetics and genomics: gene control in plants, epigenetics, co-suppression, forward and reverse genetics, structural and functional genomics. Plant development: signal perception, cell death, control of cell division. Plant-environment interactions. Crop genetic modification: food security, GMO regulation, plant transformation, whole-chromosome transformation, synthetic biology, homologous recombination. Crop molecular markers: marker types, genotyping, QTL mapping, marker-assisted breeding. Future of crop biotechnology: applications of genomics, biopharming, genetical genomics, systems biology
Module content:
Meterological observations data codes. Weather applications software and computing environments of meteorological analysis and weather forecasting techniques. Applications of remote sensing in weather forecasting. Aaerological diagrams. Applications of numerical weather prediction, and types of weather forecasts. Integration of information to describe the current state of the atmosphere and to predict a future state of the atmosphere.
Copyright © University of Pretoria 2024. All rights reserved.
Virtual Campus
Get Social With Us
Download the UP Mobile App