| Code | Faculty |
|---|---|
| 12240052 | Faculty of Engineering, Built Environment and Information Technology |
| Credits | Duration |
|---|---|
| Minimum duration of study: 1 jaar | Totale krediete: 128 |
Also consult the General Regulations G.16 to G.29.
The curriculum is determined in consultation with the relevant heads of departments. A student is required to pass modules to the value of at least 128 credits.
The degree is awarded on the basis of examinations only.
Subject to the stipulations of Reg. G.1.3 and G.54, a BEng degree or equivalent qualification is required for admission.
All students must complete the module MSS 732 Research study 732 listed below.
A limited number of appropriate modules from other departments are allowed. Not all modules liste are presented each year. Please consult the departmental post- grad brochure.
A student passes with distinction if he or she obtains a weighted average of at least 75% in the first 128 credits for which he or she has registered (excluding modules which were discontinued timeously). The degree is not awarded with distinction if a student fails any one module (excluding modules which were discontinued timeously).
Minimum krediete: 128
MSS 732 compulsory module / verpligte module
Module-inhoud:
Introduction to state space methods, full state feedback design, disturbances and tracking systems, linear observers, compensator design by the separation principle, linear quadratic optimum control, Kalman filter, linear quadratic Gaussian compensator.
Module-inhoud:
Probabilty, design and management in non-destructive testing (NDT). Fundamental theory of commonly used NDT methods: Ultrasonic testing, Electromagnetic testing (MT and ACFM). Radiographic testing, Penetrant testing, Eddy current testing. Other NDT technologies, including phased array UT, time-of flight diffraction. Digital (RT and Acoustic emission. Monitoring.
Module-inhoud:
Non-linear statics: Overview of non-linear effects: geometric, material and boundary conditions. Continuum mechanics: tensors, indicial notation, deformation gradients, stress and strain measures, transformations and rotations, stress-strain relationships, constitutive models. Principles of virtual work. Solution methods: direct iteration, Newton methods, incremental/iterative procedures. Lagrange engineering strains. Large displacement finite element analysis of continua: total Lagrangian formulation. Small strain plasticity: Additive decomposition, flow rule, hardening laws, continuum and consistent tangents.
Module-inhoud:
Sensors: mechanical and optical limit switches, encoders, thermocouples, strain gauges, CCD cameras, IR sensors, piezo-electric sensors, capacitive sensors, torque sensors, tactile sensors, gyroscope and ultrasonic sensors. Actuators: DC motors, stepper motors, AC motors, pneumatic actuators, hydraulic actuators, memory shape alloys. Signal conditioning: component interconnection, amplifiers, analogue filters, modulators and demodulators, analogue-digital conversion, sample-and-hold circuitry, multiplexers, software and hardware implementation of digital filters and Wheatstone bridge. Control: H-Bridge motor control, PWM motor control, control of stepper motors, non-linear control of hydraulic and pneumatic actuators, PLCs, SCADA systems, industrial Fieldbus, micro-processor control.
Module-inhoud:
Vibration measurement: conventional and optical technique, digital signal processing in vibrations, vibration monitoring: diagnostics and prognostics, artificial intelligence in vibration monitoring, human vibration.
Module-inhoud:
Convection correlations: high speed flows, boundary layers, similarity, conservation equations, scale analysis. Thermal radiation: physics, exchange between surfaces, solar, directional characteristics, spectral characteristics, radiation through gasses. Convection, evaporation and boiling: film condensation, film evaporation, pool boiling, forced-convection boiling and condensation, flow regime maps, phase change at low pressures, heatpipes. Heat exchangers: types, regenerators, heat exchanger design. Mass transfer: Fick’s Law, mass diffusion, mass convection, simultaneous heat and mass transfer, porous catalysts. High mass transfer rate theory. Mass exchangers.
Module-inhoud:
Theory and practical applications of condition based maintenance techniques. Pitfalls of the various condition based maintenance techniques. Acoustic emission, wear debris monitoring, oil analysis, thermography and non-destructive testing.
Module-inhoud:
Failure characteristics and analysis. Maintenance economics – Budgeting and cost control. Life cycle partnering and maintenance contracting. Legal aspects and case study. Performance measurement and benchmarking. Maintenance programming – Network analysis. Variability analysis. Maintenance strategy, plan, and protocol design – a new look at RCM. Maintenance tactic selection techniques. Introduction to condition-based maintenance. Tribology and contamination control presented with case studies. Maintenance Maturity Indexing and Variable Relationships development.
Module-inhoud:
Introduction to Logistics, RAM (Reliability, Maintainability, and Availability), Measures of Logistics, Inventory Systems,
Systems Engineering and Supportability Analysis: Systems Engineering Process, Supportability Analysis,
Aspects of Logistical Design: Logistics in the Design and Development Phase, Just-in-Time Systems, Facility Layout, Job Design and Work Measurement,
Logistics from the Development to the Retirement Phase: Logistics in the Production/Construction Phase, Logistics in the Utilisation and Support Phase,
Planning and Scheduling: Forecasting, Planning, Maintenance Scheduling, Project Management, Theory of Constraints,
Logistics Management: Quality Management, Supply Chain Management, Logistics Management.
Module-inhoud:
Introduction to probabilistic distributions, computation of system reliability, building reliability models and optimisation of system reliability; Fault Tree Analysis; Failure Modes, Effects and Criticality Analysis (FMECA), Monte Carlo Simulation; probability-based design.
Module-inhoud:
Review of the fundamentals of thermodynamics. Introduction to compressible flows. Advanced topics in compressible flows: transonic flow and supersonic flow. Oblique shock waves, expansion waves, shock-expansion theory, wave interactions and wave drag. Linearized compressible-flow theory. Effects of heat and friction on gas flow. Design aspects of high speed aeroplanes and viscous effects. Fundamentals of hypersonic flow and high temperature gas dynamics. On completion of this module the student will be able to understand the fundamental phenomena associated with compressible flow and competently apply analytical theory to compressible flow problems
Module-inhoud:
The aerodynamic discipline of missiles or slender bodies and general configuration design concepts, submarine, airship and munition development. Slender body theory, aerodynamics of bodies, aerodynamics of low aspect ratio wings, vortices, wing body interference, downwash, the wake and wing tail interference, aerodynamic controls, drag, stability derivatives, design considerations, performance, manoeuvering flight, store carriage and separation. Prerequisites for the course are aircraft design, subsonic and supersonic aerodynamics (including the concepts of potential flow, vortex theory, thin aerofoil theory, finite wing theory, compressible gas dynamics and shock wave theory) and flight dynamics.
Module-inhoud:
Terminology, Data analysis, Uncertainty, Displacement, Strain, Pressure, Flow measurements Temperature measurements. Emphasis will be placed on the experimental process from calibration through to analyses. Different experimental techniques will be covered to showcase the process.
Module-inhoud:
Introduction to Unmanned Aerial Systems, applications and examples. System breakdown and major components. Airframe and systems. Core avionics, architecture, flight control, navigation, health monitoring. Mission systems, sensors, weapons and stores, electronic warfare. Aircraft installation and integration. Ground segment, control station, take off / launch support system, landing and recovery. Command and Control, data and video link. Logistic support system. Safety and regulatory elements.
Module-inhoud:
Introduction to the functions performed by the avionics system in modern aircraft; the way in which these functions are mapped to the avionics components, starting from a presentation of the major avionics function, and the associated equipment and technologies: Human / Machine Interface, Flight Sensing (attitude, altitude, airspeed), Navigation (INS, SATNAV, Radio Nav), Flight Control and Guidance (autopilot), Radio Communication, Engine Management, Mission Sensors (radar, optronics), Health and Usage Monitoring. The main engineering challenges in Avionics System design, system integration, flight testing, safety justification and certification.
Module-inhoud:
Comfort and indoor air quality. Psychometrics. System types and selection. Cooling and heating load calculations: conduction, radiation, convection, internal loads and thermal storage. Design of air handling unit, ducts, plant and reticulation. Control systems. Introduction to integrated system simulation.
Module-inhoud:
Drag: friction, pressure, induced, interference, cooling, trim, drag estimation and reduction, piston engines, propellers, gas turbines, turbojet, turboprop and turbofan engines, propfan engines, aircraft performance, take off, climb, level flight, range, flight and manoeuvre envelopes, landing, energy methods, static stability and control: stick fixed, stick free, lateral stability and control, dihedral effect, coupling, dynamic longitudinal stability, short period oscillations, phugoid oscillations, dynamic damping, flight characteristics.
Module-inhoud:
Introduction to design and elements of computer aided design. Optimum design problem formulation. Optimum design concepts. Linear programming methods. Integer programming. Numerical methods for unconstrained and constrained optimum design. Model reduction. Interactive and practical design optimisation.
Module-inhoud:
Historical development; Linear Elastic Fracture Mechanics (LEFM): Stress concentrations and singularities, stress intensity factor, stability of crack propagation; Elasto-plastic fracture mechanics: crack tip plasticity, small scale yielding, measurement of Kic, J-integral; Fatigue crack growth: Paris Law; life prediction; combined mode fracture, strain energy density methods.
Module-inhoud:
Fluid Mechanics refresher (governing equations, boundary conditions, application of inviscid, laminar and turbulent flow). Methods of weighted residuals (finite element, finite volume and difference methods). Mesh generation and boundary conditions: Types of mesh structured and unstructured mesh generation and application (inviscid flow, heat conduction etc.). Heat conductions: Governing equations, discretisation, finite approximation, solution methods (Gauss-Seidel, Tri-diagonal matrix algorithm) etc. This module is suited to postgraduate students doing research in thermofluids and who wants to use available CFD codes or who wants to write their own codes to solve fluid mechanics, heat and mass transfer problems.
Module-inhoud:
The Efficient Solvers: Background, muligrid theory and detailed description of the algorithm. Finite Volume method: Understand the governing equations, general form of the transport equations, Gauss's theorem and the finite volume discretisation. Iterative solution algorithm: Pressure-velocity coupling, types of grids, unsteady flows, multiple phases. Finite Volume Discretisation: Diffusion term, convection term and source term for steady flows. Convection-diffusion problems: Boundary conditions, higher order discretisation, accuracy / stability. Solution Algorithm for Pressure-Velocity coupling: SIMPLE, SIMPLER, SIMPLEC and PISO. Laminar, transitional and turbulent flow: Background and theory. Turbulence modelling and examples: Definition of turbulence, turbulence modelling approaches, turbulence models ( zero-equation models, one equation, two equation, Reynolds Stress Model (RSM), Large Eddy Simulation, wall function approach), turbulence modelling guidelines. Recent CS developments: Current state of the art in turbulence modelling etc. Viscous boundary meshes: Background and objectives, internal and external flow, turbulence modelling considerations.
Module-inhoud:
*This is a compulsory research module.
This module allows a student to do research on a certain topic in mechanical or aeronautical engineering, as specified by a lecturer in the Department of Mechanical and Aeronautical Engineering, on an individual basis, under the supervision of that lecturer. The study should be seen as a precursor to the master’s degree research that may follow the honours degree. The total volume of work that is to be invested in this module by an average student must be 320 hours. The body of knowledge studied must be of an advanced nature, at the level of the other postgraduate modules offered by the Department. Normal requirements for assessment that include the use of an external examiner apply to this module also.
Module-inhoud:
Fatigue principles addressing both elasticity and plasticity; notch effects; variable amplitude loading conditions; multi-axial fatigue and weld fatigue.
Module-inhoud:
Mathematical preliminaries: historical overview, scalar, vector and tensor algebra (in context of partial differential equations), Green's lemma and the Divergence theorem, Eularian/Lagrangian representations, derivative of a function, Reynolds transport theorem. Governing equations: viscous compressible and incompressible flow, derivation of conservation of mass, derivation of conservation of momentum, boundary conditions, mathematical characteristics, non-dimensionalisation. Viscous compressible and incompressible flow: derivation of conservation of mass, derivation of conservation of momentum, boundary conditions, mathematical characteristics, non-dimensionalisation.
Module-inhoud:
Exact solutions: potential flow, Couette flow, Poiseuille flow and combined Couette-Poiseuille flow, laminar boundary layers (similarity solutions for flat plate flow). Stability of laminar flows: introduction, linearised stability, transition to turbulence, approximate prediction of transition. Turbulent flow: Reynolds averaged equations, two-dimensional turbulent-boundary-layer equations, velocity profiles, turbulent flow in ducts, flat plate flow, turbulence modelling.
Module-inhoud:
Fundamental concepts of thermodynamics, total flow exergy, restricted dead state and unconstrained equilibrium state, heat transfer, fluid flow and chemical irreversibilities, thermodynamic optimisation, irreversibility distribution ratio, lost exergy, application of entropy generation minimisation (EGM) technique to the fundamentals of power generation, solar power, wind power, and low temperature refrigeration.
Module-inhoud:
Design of reactor coolant system, heat sources in reactor systems, heat transmission principles, heat transmission in systems with internal sources, temperature distribution along path of reactor coolant flow, heat transfer characteristics of fluids, heat transfer to boiling liquids, heat transfer characteristics of gasses.
Module-inhoud:
Atomic structure, nuclear energy and nuclear forces, nuclear fission, nuclear reactions and radiation, energy removal, nuclear reactor systems, radiation protection, radiation shielding, meteorology, reactor safety analysis.
Module-inhoud:
Probability concepts and nuclear cross sections, multiplication factor and neutron flux, slowing-down process in the infinite medium, diffusion theory the homogeneous one-velocity reactor, Fermi age theory: the homogeneous multi-velocity reactor, transport theory, reflected reactors, reactor kinetics, heterogeneous reactors, control-rod theory.
Module-inhoud:
Overview of the functions of the various classes of nuclear materials, elastic deformation, yielding and use of texture in nuclear components, atomic processes in plastic deformation and radiation damage, strength of engineering materials.
Module-inhoud:
Creep deformation, fracture processes and metallurgical fracture mechanics, fatigue fracture in nuclear materials, fabrication processes of nuclear materials.
Module-inhoud:
This module contains a comprehensive study of all mechanical systems and processes of a fossil fuel power station. The module will include the analysis of steam cycles, combined cycle power generation, fuels and combustion, combustion mechanisms, combustion equipment and firing methods, the draught group, steam generators, steam turbines, condenser, feed water and circulating water systems, coal handling, ash handling, compressor plant, water treatment, the importance of HVAC, control and instrumentation, control philosophies and environmental considerations.
Module-inhoud:
Tyres: Characteristics and tyre models used in simulation of ride comfort and handling. Road inputs: Classification of roads. Road profiles. Road roughness. Suspension components: springs, dampers. Controllable suspension systems. Modelling aspects. Human reaction: Human response to vibration. Driver models. Human reaction times. Vertical vehicle dynamics (ride comfort): Vibration levels in a vehicle. Simulation of ride comfort. Effect of seat characteristics on vibration levels. Test and evaluation procedures. Lateral vehicle dynamics (handling): Simulation of steady state and dynamic handling. Rollover propensity. Test procedures. Computer applications: Application of computer codes in the analysis of vehicle dynamics.
Module-inhoud:
Solving systems of linear algebraic equations using direct and iterative methods from small to large scale systems. Numerical solutions of nonlinear systems of equations. Solving eigenvalue problems. Numerical approximation strategies. Numerical differentiation. Numerical Integration. Numerical solutions to initial-value problems for ordinary differential equations. Numerical solutions to boundary-value problems for ordinary differential equations. Numerical solutions to partial-differential equations.
Copyright © University of Pretoria 2024. All rights reserved.
Virtual Campus
Get Social With Us
Download the UP Mobile App