| Code | Faculty | Department |
|---|---|---|
| 02130108 | Faculty of Natural and Agricultural Sciences | Department: Consumer and Food Sciences |
| Credits | Duration | NQF level |
|---|---|---|
| Minimum duration of study: 4 jaar | Totale krediete: 512 | NQF level: 08 |
Important information for all prospective students for 2022
Transferring students
A transferring student is a student who, at the time of application for a degree programme at the University of Pretoria (UP) –
A transferring student will be considered for admission based on
Note: Students who have been dismissed at the previous institution due to poor academic performance, will not be considered for admission to UP.
Returning students
A returning student is a student who, at the time of application for a degree programme –
A returning student will be considered for admission based on
Note: Students who have been excluded/dismissed from a faculty due to poor academic performance may be considered for admission to another programme at UP. The Admissions Committee may consider such students if they were not dismissed more than twice. Only ONE transfer between UP faculties will be allowed, and a maximum of two (2) transfers within a faculty.
Important faculty-specific information on undergraduate programmes for 2022
University of Pretoria website: click here
Minimum requirements | ||
Achievement level | ||
English Home Language or English First Additional Language | Mathematics | APS |
NSC/IEB | NSC/IEB | |
5 | 4 | 28 |
1.1 Requirements for specific modules
A candidate who:
or
or
1.2 Fundamental modules
A student who did not pass all the prescribed modules of a particular year of study, has to register for the outstanding modules first. With the approval of the head of the department, modules of the following year of study may be taken in advance only if no timetable clashes occur; all the requirements and prerequisites have been met and not more than a specified number of credits per semester are taken. The credits of the semester of which modules are repeated, are taken as a guideline for the calculation of the number of modules permitted.
OPI 400 (Experiential training in industry): During the first to fourth years of study students must complete a total of 480 hours experiential training in the industry to develop practical and occupational skills, participate in community engagement and provide service learning. This is equal to 3 weeks x 40 hours (120 hours) per year, according to requirements as determined by the head of department. These credits include evidence of experiential training, service learning and community engagement during the four years of the study programme and must be successfully completed together with a complete portfolio before the degree will be conferred. Please note: Various practical and industry-interaction activities support the theoretical component of VDS 417 & VDS 427, VDS 413 and FST 412 and take place after hours to develop practical and industry skills.
Minimum krediete: 133
Fundamental = 14
Core = 119
Additional information:
Students who do not qualify for STK 110 must register for STK 113 and STK 123.
Module-inhoud:
Find, evaluate, process, manage and present information resources for academic purposes using appropriate technology.
Module-inhoud:
Apply effective search strategies in different technological environments. Demonstrate the ethical and fair use of information resources. Integrate 21st-century communications into the management of academic information.
Module-inhoud:
The module aims to equip students with the ability to cope with the reading and writing demands of scientific disciplines.
Module-inhoud:
This module provides an overview of the fundamentals of marketing by considering the exchange process, customer value, marketing research and the development of a marketing plan. It also addresses the marketing mix elements with specific focus on the seven service marketing elements namely the service product, physical evidence, people, process, distribution, pricing and integrated marketing communication.
Module-inhoud:
This module deals with the core principles of economics. A distinction between macroeconomics and microeconomics is made. A discussion of the market system and circular flow of goods, services and money is followed by a section dealing with microeconomic principles, including demand and supply analysis, consumer behaviour and utility maximisation, production and the costs thereof, and the different market models and firm behaviour. Labour market institutions and issues, wage determination, as well as income inequality and poverty are also addressed. A section of money, banking, interest rates and monetary policy concludes the course.
Module-inhoud:
This module deals with the core principles of economics, especially macroeconomic measurement the private and public sectors of the South African economy receive attention, while basic macroeconomic relationships and the measurement of domestic output and national income are discussed. Aggregate demand and supply analysis stands core to this course which is also used to introduce students to the analysis of economic growth, unemployment and inflation. The microeconomics of government is addressed in a separate section, followed by a section on international economics, focusing on international trade, exchange rates and the balance of payments. The economics of developing countries and South Africa in the global economy conclude the course.
Module-inhoud:
The nature and function of accounting; the development of accounting; financial position; financial result; the recording process; processing of accounting data; treatment of VAT; elementary income statement and balance sheet; flow of documents; accounting systems; introduction to internal control and internal control measures; bank reconciliations; control accounts; adjustments; financial statements of a sole proprietorship; the accounting framework.
Module-inhoud:
Budgeting, payroll accounting, taxation – income tax and an introduction to other types of taxes, credit and the new Credit Act, insurance, accounting for inventories (focus on inventory and the accounting entries, not calculations), interpretation of financial statements.
Module-inhoud:
Introduction (terminology and anatomical orientation); chemical principles; cytology and histology; neuro-physiology and the senses; haematology and body fluids; cardiovascular system.
Module-inhoud:
Respiratory system; nutrition; digestion and metabolism; kidneys and acid-base equilibrium; endocrinology; reproduction physiology and reproduction; skin and body temperatures.
Module-inhoud:
An introduction to the elements and principles of design as is applicable to interior and clothing design and food preparation. Colour theory.
Module-inhoud:
The entrepreneurial mind-set; managers and managing; values, attitudes, emotions, and culture: the manager as a person; ethics and social responsibility; decision making; leadership and responsible leadership; effective groups and teams; managing organizational structure and culture inclusive of the different functions of a generic organisation and how they interact (marketing; finance; operations; human resources and general management); contextualising Sustainable Development Goals (SDG) in each of the topics.
Module-inhoud:
Value chain management: functional strategies for competitive advantage; human resource management; managing diverse employees in a multicultural environment; motivation and performance; using advanced information technology to increase performance; production and operations management; financial management; corporate entrepreneurship.
Module-inhoud:
Descriptive statistics:
Sampling and the collection of data; frequency distributions and graphical representations. Descriptive measures of location and dispersion.
Probability and inference:
Introductory probability theory and theoretical distributions. Sampling distributions. Estimation theory and hypothesis testing of sampling averages and proportions (one and two-sample cases). Supporting mathematical concepts. Statistical concepts are demonstrated and interpreted through practical coding and simulation within a data science framework.
Module-inhoud:
Module 1: Basic food preparation and food preparation techniques. Mise en place, weighing and measurement techniques, equipment and terminology as applied in food preparation. History of the foodservice industry and contemporary chefs. Basic food quality control.
Module 2: Food preparation basics of the following: stocks, soups and sauces
Module-inhoud:
Module 1: Principles and practices of food preparation and cooking techniques. Mise en place, weighing and measurement techniques, equipment and terminology as applied in food preparation. Basic food quality control.
Module 2: Food preparation basics of the following: starches and cereals
Minimum krediete: 124
Module-inhoud:
Internal and external influencing factors of consumer behaviour, the consumer's decision process and application fields of consumer behaviour, consumerisms and social responsibility, buying behaviour of consumers in both product and service related industries, consumer psychology and the influence thereof on buying behaviour, psychology of pricing, influencing factors in consumer buying behaviour, the impact of various forms of marketing communication on buying behaviour.
Module-inhoud:
Integrated brand communications approach, marketing communication planning, objectives and budgets for integrated marketing communications, principles and strategising of marketing communication elements, new media, the brand name communication process, marketing metrics and evaluation for marketing communication effectiveness.
Module-inhoud:
Basic principles of law of contract. Law of sales, credit agreements, lease.
Module-inhoud:
Labour law. Aspects of security law. Law of insolvency. Entrepreneurial law; company law, law concerning close corporations. Law of partnerships.
Module-inhoud:
Logistics management
The role of logistics in an enterprise; definition and scope of customer service; electronic and other logistics information systems; inventory management; materials management with special reference to Japanese systems; management of the supply chain. Methods of transport and transport costs; types and costs of warehousing; electronic aids in materials handling; cost and price determination of purchases; organising for logistics management; methods for improving logistics performance.
Module-inhoud:
Consumer decision-making (determinants of informed, responsible consumer decisions, the complexity of consumer decisions), consumer satisfaction, consumer socialisation (consumer education, development of consumer skills), consumerism (consumer protection) and consumer complaint behaviour. Gender issues in consumer decision-making, expenditure patterns of the diverse South African consumer market and globalisation. The UN sustainable development goals #5 and 12 are addressed in this module and all projects are focused on responsible consumption behaviour.
Module-inhoud:
Module 1: The study of different food systems with regard to food preparation. Physical and chemical properties and the influence of the composition in food preparation.
Module 2: Food preparation basics of the following: soups and sauces, fruit and vegetables; salads; frozen desserts; gelatine.
Module 3: Origin and development of food habits; Factors influencing habits and choice; Dynamics of food habits.
Influence of religion on food habits. Food habits of different ethnic groups.
All modules encompass sustainable food preparation practices through the principles of waste management, including the utilising and minimization of food waste and portion control. Sustainability is addressed by the food practices of local ethnic cultures, the ingredients used by these cultures and how to utilise these ingredients and substituting ingredients with local alternatives.
Module-inhoud:
Module 1: The study of different food systems with regard to food preparation. Physical and chemical properties and the influence of the composition in food preparation.
Module 2: Food preparation basics of the following: meat; poultry; fish, legumes, eggs and milk, baked products (whole spectrum); leavening agents.
Module 3: The influence of culture on cuisines. Study of the cuisines of selected African, European and Eastern countries.
All modules encompass sustainable food preparation practices through the principles of waste management, including the utilising and minimization of food waste and portion control. Sustainability is addressed by the food practices of local ethnic cultures, the ingredients used by these cultures and how to utilise these ingredients and substituting ingredients with local alternatives.
Minimum krediete: 135
Module-inhoud:
The theoretical basis of Labour Relations
In this section the basic concepts, historical context and theoretical approaches to the field of labour relations will be discussed. The institutional framework in which labour relations operates, will be addressed with particular emphasis on the structural mechanisms and institutional processes. The service relationship that forms the basis of labour relations practices, will also be analysed.
Labour Relations practice
In this section students are taught the conceptual and practical skills related to practice aspects such as handling of grievances, disciplining, retrenchments, collective bargaining, industrial action and dispute resolution.
Module-inhoud:
The role of marketing research, the process of marketing research, interpretation of secondary research, qualitative research, survey research, observation, measurement and attitude scaling, questionnaire design, sampling design and sampling procedures, basic data analysis, descriptive statistical analysis, interpretation and reporting of results, research report writing.
Module-inhoud:
Strategic issues in marketing, strategic marketing, strategic analysis (market analysis, customer analysis, competitor analysis and internal analysis), market strategies (competitive strategies, strategies in the product life cycle and relationship building strategies) and strategy implementation and control.
Module-inhoud:
Introduction to aesthetics. The interaction between environments and consumers’ aesthetic experience. Visual merchandising: basic components, tools, techniques, and equipment used in clothing and food retail settings. Use of sustainable strategies in visual merchandising planning in clothing, and food retail settings. Latest trends in clothing and food visual merchandising. This module addresses UN sustainable development goals: #8 (decent work and economic growth), #9 (industry innovation and infrastructure) and #12 (responsible consumption and production).
Module-inhoud:
The study of nutrients and water regarding their chemical composition, characteristics, basic digestion, absorption, metabolism, functions, food sources and symptoms of deficiency and toxicity. Energy metabolism. Dietary recommendations and guidelines, dietary guides and meal planning. The use and application of food composition tables in dietary analysis.
Module-inhoud:
The role of nutrition in the life cycle: Prevention of lifestyle related diseases such as osteoporosis, cancer, coronary heart disease, tooth decay. Protein energy malnutrition and obesity.
Module-inhoud:
Planning executing and reporting consumer food research. Food preservation and evaluation techniques. Experiments in food, emphasizing ingredient function and standard preparation methods. Application of experimental methods through which the chemical and physical reactions of food to different food handling, preparation and preservation techniques are illustrated. Quality evaluation and consumer orientated sensory evaluation of food products.
Module-inhoud:
Module 1: General anatomy and morphology of bacteria, viruses and fungi. Basic nutritional requirements of micro-organisms and the effect of environmental factors on microbiological growth. Food decay, food poisoning and preservation of food by micro-organisms. Basic principles involved in disinfections, sterilization and control of microbes; techniques of microbial repression: sterilization by using heat, radiation, filtration, chemicals decimation of numbers.
Module 2: Food safety approached from retail, commercial and institutional angles. Safety issues surrounding food. Principles of food safety and food hygiene; good manufacturing practices; HACCP and risk analysis; employee health, hygiene and safety; Consumer rights and protection; occupational health and safety; health and food safety legislation in South Africa.
Minimum krediete: 128
Additional information:
OPI 400 (Experiential training in industry): During the first to fourth years of study students must complete a total of 480 hours experiential training in the industry to develop practical and occupational skills, participate in community engagement and provide service learning. This is equal to 3 weeks x 40 hours (120 hours) per year, according to requirements as determined by the head of department. These credits include evidence of experiential training, service learning and community engagement during the four years of the study programme and must be successfully completed together with a complete portfolio before the degree will be conferred. Please note: Various practical and industry-interaction activities support the theoretical component of VDS 417 & VDS 427, VDS 413 and FST 412 and take place after hours to develop practical and industry skills.
Module-inhoud:
Principles and applications of sensory evaluation. Types of panels, tests and test conditions and their functions. Selection and training of panellists for descriptive sensory evaluation. Instrumental sensory quality measurements. Statistical analysis and interpretation of data. Practicals: Practical aspects and execution of sensory evaluation techniques, analysis and interpretation of data. Instrumental sensory quality measurements.
Module-inhoud:
During the first to fourth years of study students must complete a total of 600 hours experiential training in the industry to develop practical and occupational skills, participate in community engagement and provide service learning. This is equal to 3 weeks x40 hours (120 hours) per year for the first to third year and 6 weeks x 40 hours in the fourth year, including the following:
or
These ‘credits’ comprise 50 learning hours and the balance of the hours include work-related experience evidence of experiential training, service learning and community engagement during the four years of the degree programme and must be successfully completed together with a complete portfolio before the degree will be conferred.
Please note: Various practical and industry-interaction activities support the theoretical component of VDS 322, 413, 414, 417, 424, 427 and FST 412 (as applicable to the respective Consumer Science programmes) and take place after hours to develop practical and industry skills.
Module-inhoud:
Research methodology. Plan, execute and report research project in clothing retail management, food retail management, hospitality management or culinary science.
Module-inhoud:
The professional food service manager’s roles, responsibilities and characteristics. Contemporary leadership and management styles in food service systems. Professionalism and ethics. Advanced food service systems and production management techniques and training facilitation. Marketing of food services.
All lectures and practical discussion sessions focus on the role of food service management in addressing the UN Sustainable Development Goal #12 to promote sustainable consumption and production patterns. The practical components of presenting a workshop and setting up a small business encourages innovation and entrepreneurial growth and sustainability, thereby addressing the UN Sustainable Development Goal #8 to promote full and productive employment and economic growth.
Module-inhoud:
Recipe development process. Development of appropriate recipes and food products for a given situation.
Standardisation of recipes. Food styling and food photography.
The UN sustainable development goals #3; 8; 9; 11 and 12 are addressed during the theory components and practical sessions. Projects are focused on identifying not only critical areas of concern but also possible mitigating strategies thus encouraging innovation to achieve good health and well-being, responsible industry consumption, production community engagement and economic growth.
Module-inhoud:
Role playing factors relating to consumer behaviour, food procurement and consumption. The introduction of the 2011 Consumer protection act and food labelling laws. Consumer education in relation to consumers’ social responsibility. The UN sustainable development goal #12 is addressed in this subject. Projects are focused on consumer education, responsible consumer consumption and household production as well as community engagement.
Module-inhoud:
A South African perspective on food retail management with a focus on how general logistics throughout the supply chain is implemented with the South African consumer in mind. Aspects of food retailing with regard to display, presentation and shop layout as applied to food products are accentuated. This includes a practical application of the principles in visual merchandising of food and food retailing in the food industry. The UN sustainable development goal #12 is addressed during the theory components and practical sessions. Projects are focused on identifying not only critical areas of concern across the supply chain with possible mitigating strategies (thus encouraging responsible industry consumption, production) but also the adoption of innovative marketing strategies/ visual merchandising that educate consumers in terms of more sustainable consumption and production.
Copyright © University of Pretoria 2024. All rights reserved.
Virtual Campus
Get Social With Us
Download the UP Mobile App